AmeriWater: Fiberflo Hollow Fiber Cartridge Filters at Reduced Prices

FiberFlo^® Hollow Fiber Cartridge Filters

Bacteria, Particle, and Pyrogen Removal*

The unique membrane structure of FiberFlo® HF capsule filters provides consistent and verifiable pyrogen removal* which surpasses traditional, absolute-rated membrane filters. High-level endotoxin, bacteria, and spore removal make these point-of-use filters ideal for a variety of water purification or process fluid applications.

Longer Lasting

FiberFlo capsules have up to three times the surface area of comparable pleated capsule filters. This larger membrane surface area provides greater capacity and longer life than pleated filters, resulting in lower filter replacement costs.

Easy to Maintain

FiberFlo HF capsule filters can be steam sterilized in-line or autoclaved off-line.

Customized

FiberFlo capsule filters are available in four lengths, four micron ratings, and a variety of endcap styles to fit a variety of standard filter housings.

Quality Assured

FiberFlo cartridge filters are manufactured to medical device quality standards with adherence to GMP manufacturing guidelines. These filters exceed the requirements of USP Class VI Plastics Testing and meet USP XXIII standards for purified water extractables. FiberFlo HF capsule filters are integrity testable by diffusional methods.

*The pore size of the FiberFlo 450 is not designed to remove pyrogens.

FiberFlo^® Capsule Membrane Selection

FiberFlo^® 50

FiberFlo HF 50 offers the highest degree of control of particulates and microorganisms through its absolute pore removal rating of 0.05µm and the retentive characteristics of its Polyphen^TM polysulfone membrane. It is recommended for the most demanding bacteria, particle, and pyrogen removal applications. FiberFlo HF 50 will remove 100 percent of endotoxin¹ when challenged with a feed concentration of 5.0 EU/ml.

FiberFlo^® 100

FiberFlo HF 100 offers the best balance of flow, pressure, retentive capacity, pyrogen removal, and cost. Its absolute pore removal rating of 0.1µm, and overall pore structure gives high water flow rates and excellent control of particulates, microorganisms, and pyrogens. FiberFlo HF 100 will remove 100 percent of endotoxin¹ when challenged with a feed concentration of 1.0 EU/ml.

FiberFlo^® 200

FiberFlo HF 200 offers maximum flow rates without loss of bacteria retention. Absolute removal of Brevundimonas diminuta is a characteristic of this filter, and it will remove 100 percent of endotoxin¹ when challenged with a feed concentration of 0.5 EU/ml. The ability of FiberFlow HF 200 to remove bacteria and particulates gives it performance characteristics unmatched by traditional 0.2 micron pleated membrane filters.

FiberFlo^® 450

FiberFlo HF 450 is designed fpr prefiltration and fluid clarification applications. The HF 450 assures maximum protection of downstream sterilizing filters. It provides superior particle control, dirt-holding capacity, and flow rates. The ability of the FiberFlo HF 450 to remove particulates is unmatched by traditional 0.45µm absolute pleated membrane filters.

1] Minimum LAL test sensitivity of 0.06 EU/ml.

FiberFlo	50	100	200	450
Pore Size (µm)	0.05 Absolute¹	0.1 Absolute¹	0.2 Absolute¹ ²	0.45 Absolute¹
Maximum Flow Rate per 10" Segment	2.5 GPM	3.0 GPM	3.0 GPM	5.0 GPM
Membrane	Polyphen Polysulfone
Maximum Differential Pressure	30 PSI (2 Bar)
Surface Area	16 sq ft (1.5 sq meters)
Diameter	2.9 in (6.4 cm)
Nominal Length	10 in, 20 in, 30 in, 40 in (25 cm, 51 cm, 76 cm, 102 cm)
Case and End Caps	Polypropylene
End Seals	Polyurethane
Extractables	Passes U.S.P. tests for oxidizable substances and total solids for purified water.
Fiber meets all USP-XXIII Class VI criteria as well as test standards for tissue cytoxicity
1) As determined by latex bead challenge. Procedure available upon request.
2) As determined by HIMA challenge and latex bead challenge.

SOE flat, closed end

SOE fin end

External 222 O ring

External 226 O ring

Please have the following information ready before calling AmeriWater's toll-free phone number:
(If you enable Javascript on your browser and reload the page, this will be a lot easier.)

Select type:	FiberFlo 50	FiberFlo 100	FiberFlo 200	FiberFlo 450

Select length:	10 inch	20 inch	30 inch	40 inch

Select style:

Style 3: SOE flat, closed end, external 222 O-ring. Replaces Pall Code 3, Millipore Code 0.
Style 4: SOE fin end, external 222 o-ring. Replaces Pall Code 8, Millipore Code 5.
Style 5: SOE fin end, external 226 o-ring. Replaces Pall Code 7, Millipore Code 7.
Style 7: SOE mini fin end, internal 119 O-ring. Installs in standard 10-in Ametek Housing*
Style 8: SOE flat, internal 119 O-ring. Installs in standard 20-in Ametek Housing*

Call AmeriWater toll-free to order at discount prices or for further information:
1-800-535-5585

or E-mail us for a quote
Price Quote please

1303 Stanley Avenue
Dayton, Ohio 45404
Phone: 937-461-8833
Phone: 800-535-5585
Fax: 937-461-1988

e-mail: watertech@ameriwater.com