• Regeneration water is carbon pre-filtered.



• Controller with digital conductivity and hydraulic stager.



• Automatic operation with operator initiation and automatic shut-off at the end of cycle.



• Regeneration time less than three hours with waste water of less than 300 gallons. Uses only 5 gallons of 30‰ HCl acid and 2 gallons of 50‰ NaOH caustic per generation.



• Piping and stand is PVC and fiberglass with socket weld joints.



• Diaphragm control valves with PVC true union bodies and appropriate wetted parts for acid and caustic.



• Two 2.5 cubic feet polyethylene fiberglass reinforced with quick-connect resin tanks. One with strong acid cation and one with weak base anion resin.

• Reduce 10,000-20,000 gallons of rinse water down to 250-275 gallons.



• Waste can be evaporated, hauled or precipitated and filter pressed.



• Better spotfree rinsing.



• Plating lines can be segregated.



• Cyanide destruct at regeneration station — not on-line at the plating path.



• Two 2.5 cubic feet polyethylene fiberglass reinforced with quick-connect resin tanks. One with strong acid cation and one with weak base anion resin.

Demineralizing the make-up water decreases the load of solids on the heavy metal removal tanks. Also, by demineralizing your make-up water your product will be cleaner and spotfree.

The Silex® Demineralizer system consists of PVC housings that hold ion-exchange resin packs, a pre-filter for chlorine removal and a water quality monitor to indicate when it is time to exchange the packs.

The exhausted packs are shipped to AmeriWater (UPS/FedEx) along with a regeneration certificate. Within 24 hours of receipt, fresh packs are shipped back to you.

e-mail: watertech@ameriwater.com