Ameriwater: PrintWater Systems

The Answer to Your Printing Problems

PrintWater Systems provide demineralized water with stable conductivity for your quality printing demands.

PrintWater DM-1

The PrintWater DM-1 allows you to make your own demineralized water with very little investment. It's the perfect size for printers that use less than 50 gallons a day of treated water. Each PVC canister holds 1/2 cubic foot of resin specially blended to ensure consistent water quality production. Simply replace the exhausted resin packs with spare packs you keep on hand. Then send the exhausted packs to the PrintWater regeneration center (Dayton, OH) via parcel post. Within a few days you will receive fresh packs.


Dimensions	18" W x 9.5" D x 46" H

Weight	75 pounds (without resin packs) 120 pounds (with resin packs)

Flow Rate	3 gallons per minute

Installation Requirements	Standard 115V receptacle Nearby drain or drain pump Click here for typical installation diagram

Water Supply	1/2" line minimum is best

The PrintWater DM-1 Demineralizer offers a simple, economical way of producing demineralized water.


1.	Purchase the DM-1 System. Each canister holds 1/2 cubic foot of resin contained in a pack, specific to your application.
2.	When the water quality monitor indicates that the resin is exhausted, simply remove the lid, pull the exhausted pack out, and slide a new pack in.
3.	Send the exhausted pack to AmeriWater. Within 24 hours, a fresh pack will be shipped to you.

Certificate System Makes Exchanging Packs A Breeze!

Mutiple regeneration certificates are purchased in any quantity and used as payment for the resin pack regeneration service. When you send each pack to AmeriWater, enclose a regeneration certificate in the box. AmeriWater receives the exhausted pack and certificate (your payment for the service). The next day, a freshly regenerated pack is shipped to you. This system eliminates the aggravation of dealing with phone calls, paperwork and purchase orders each time packs are exchanged. You won't receive an invoice for freight.
We Pay for Return Freight To You.
It's all included with the regeneration certificate! By keeping a few spare packs on hand, you avoid downtime.

PrintWater RO-1

The PrintWater RO-1 Reverse Osmosis System connects to your tap water supply and provides water of consistent quality for your printing operation. The system includes: solid blue storage tank to prevent algae growth, repressurization pump, anti-scalant system, carbon filter, operation manual and installation kit.


RO Dimensions	15" W x 23" D x 45" H

Storage Tank	23" Dia x 76" H, 130 gallon capacity

Weight	225 pounds

Flow Rate	Up to 500 gallons per day

Installation Requirements	Two dedicated 20 amp/115V circuits Nearby drain or drain pump Click here for typical installation diagram

Water Supply	Tap water supply acceptable Minimum 20 PSI flow at 5 GPM

PrintWater RO-2

The PrintWater RO-2 Reverse Osmosis System has all the same features and ease of use as the RO-1 system but provides larger tank capacity and a heavier duty package for increased flow demands.


RO Dimensions	27" W x 21" D x 50" H

Storage Tank	31" Dia x 72" H, 200 gallon capacity

Weight	245 pounds

Flow Rate	Up to 1200 gallons per day

Installation Requirements	Two dedicated 20 amp/115V circuits Nearby drain or drain pump

Water Supply	Tap water supply acceptable Minimum 20 PSI flow at 5 GPM

PrintWater RO-3

The PrintWater RO-3 Reverse Osmosis System is similar to the RO-2 system but with even greater capacity.


RO Dimensions	27" W x 21" D x 50" H

Storage Tank	35" Dia x 81" H, 300 gallon capacity

Weight	255 pounds

Flow Rate	Up to 2400 gallons per day

Installation Requirements	Two dedicated 20 amp/115V circuits Nearby drain or drain pump

Water Supply	Tap water supply acceptable Minimum 20 PSI flow at 5 GPM

1303 Stanley Avenue
Dayton, Ohio 45404
Phone: 937-461-8833
Phone: 800-535-5585
Fax: 937-461-1988

e-mail: watertech@ameriwater.com