Printwater Systems


Demineralized Water for Printwater Systems

WATER FILTRATION SYSTEMS

For Applications Requiring 1-50 GPD

The printwater 00DM-1 allows you to make your own demineralized water with very little Dual Column Demineralizer for Printwaterinvestment. By using demineralized water produced by printwater systems, you can count on water conductivity between 10 and 20 micromhos (microsiemens/cm), the perfect water for mixing with your press chemistries for consistent and continuous printing. The 00DM-1 package includes dual column demineralizer, pressure regulator, 10,000 ohm water quality light, complete installation kit, manual, and four resin packs (two for use/two for spare). Each PVC canister holds ½ cubic foot of resin specially blended to ensure consistent water quality production. As water runs through the system, the resin removes the minerals that cause problems for printers. The green light on the monitor indicates that you are producing quality water. When the light turns red, it is time to exchange to fresh resin packs.

 

For Applications Requiring 50-2,200 GPD

By using demineralized water produced by printwater systems, you can count on water Reverse Osmosis Systems for Printwaterconductivity between 10 and 20 micromhos (microsiemens/cm), the perfect water for mixing with your press chemistries for consistent and continuous printing. The RO Series includes reverse osmosis system, solid blue storage tank to prevent algae growth, repressurization pump, anti-scalant system, carbon filter, and installation kit.

  • Carbon housing for chlorine removal
  • A thin film composite membrane provides superior salt rejection and flow
  • Anti-scalant pump system eliminates the need for a water softener
  • Quiet, stainless steel/plastic inline pump delivers trouble free service
  • Anti-scalant liquid reduces scale build up; easily topped off monthly
  • Temperature compensated digital controller displays conductivity, hours of operation and feed water temperature
  • Simple tank level connection
  • Pump pressure gauge
  • Rotometer measures product water flow in GPM/LPM
  • Pre and post treatment filter gauges
Model 00RO-1 00RO-3
Maximum Flow Rate 800 2,200
Installation Requirements Two dedicated 20 amp / 115V circuits, nearby drain or drain pump
Water Supply Tap water supply acceptable, minimum 20 PSI flow at 5 GPM
RO Dimensions In. (W x D x H) 15 x 23 x 45 27 x 21 x 50
Storage Tank Dimensions In. (Dia x H) 23 x 76 35 x 81
Storage Tank Capacity Gallons 130 300
Weight Lbs. 225 255
 

00DM-1 SPECIFICATIONS:

  • Flow Rate: 3 GPM
  • Installation Requirements: Standard 115V receptacle, nearby drain or drain pump
  • Water Supply:
    1/2″ line minimum is best
  • Dimensions:
    18″ W x 9.5″ D x 46″ H
  • Weight: 75 Lbs. (without resin packs), 120 Lbs. (with resin packs)