Home — Careers — Press Releases — Contact Us
CRO Cabinet Style Reverse Osmosis
sizes from 300 to 2,000 GPD
A complete water treatment system!
Everything you need is inside the cabinet!
No need for pre-treatment!
Above: front view - Below: Back view


CRO Model Specifications
Model:
CRO1 CRO2 CRO3
Performance:
Projected Rejection >96% >96% >96%
Initial Production (GPD)* 1400 2800 4200
Product Flow (GPM)* 1.0 2.0 3.0
Recovery Rate 50-75 % 50-75 % 50-75 %
Electrical
Three Phase** 115V 20 Amps (Isolated Circuit)
Pump Horse Power 1.5
Membranes:
Size (inches) 25 x 40 25 x40 25 x40
Quantity 1 2 3
Type Thin Film Composite Thin Film Composite Thin Film Composite
Feed Water Requirements CRO1 CRO2 CRO3
Max Free Chlorine <0.1 <0.1 <0.1
Temperature Range 33-113 degrees F (1-45 degrees C)
Operating pH Range 4-11 4-11 4-11
Prefiltration 5 micron 5 micron 5 micron
Pressure Feed Range (PSIG) 20-80 20-80 20-80
Max Fouling Index (SDI) <3 <3 <3
Langelier Saturation Index <0 <0 <0
Dimensions
Connections Inlet=3/4"FGHT / Product=3/4" MGHT / Drain= 1/2"
H x W x D (inches) 50 x 23 x 18.5

* Product flow rate varies with temperature. All model capacities are rated at 77 degrees F (25 C) with feed water of 1500 mg/L NaCl @ 200 PSI and pH of 7.5

Includes mounted repressurization pump
AmeriWater makes a wide variety of RO Water Treating Systems to accomodate almost any situation. Starting from our smaller systems going on up to our custom designed systems, choose the catagory that fits your needs:
CRO Cabinet Style RO System - (Sizes range from 300-2,000 GPD)
IRO Open Skid RO System - (Sizes range from 2,000-15,000 GPD)
Custom Designed Larger Capacity RO Systems

Optional maintenance program
Save energy, time and money while keeping your operating costs low with this simple and easy maintenance program. It lets you economically keep a spare set of components on hand. Depending on your needs this could include…

• spare membrane(s)
• PT401 anti-scalant liquid
• carbon pack(s)
• deionizer resin pack(s)
• particulate filter(s)

When your components are exhausted, remove them and send the exhausted set by parcel to AmeriWater for replenishing.

Service is no problem
AmeriWater RO's have been designed so that any component can be easily replaced in minutes. If you have a service problem, just remove the component and call AmeriWater. Within 24 hours you'll receive a new component.

24 hour hotline
Working three shifts and weekends? Don't worry, AmeriWater is there to support you. If you have an emergency, call our toll-free 24 hour hotline.
 
1303 Stanley Avenue
Dayton, Ohio 45404
Phone: 937-461-8833
Phone: 800-535-5585
Fax: 937-461-1988
e-mail: info@ameriwater.com