T: 800 535 5585   E: info@ameriwater.com

Get In Touch

Please click on your area of interest:
Please click here to receive special offers and updates.
Industrial Products Overlay
Click Here to Inquire >
Silex Deionization Systems – 30 up to 75 GPD

Silex Deionization Systems – 30 up to 75 GPD

The Silex dual worker/polisher deionizer is designed for greater usage than the single housing system and/or higher water quality. Uses include labs, critical spot free rinsing, polishing RO product water for ultra-pure requirements, chemical dilution and mixing, humidification, etc. The Silex deionizer uses packs of mixed bed resin that is sent back to the regeneration center to be recharged. A spare set is usually purchased so they can be alternated for regeneration. The regeneration service is only a fraction of the cost of disposable deionizer beds or cartridges. The all PVC housings are durable and the packs are easy to exchange. Pre and post filtration is available as well as resistivity monitors that change from green to red when it’s time to exchange the packs. Units are available with a resistivity monitor of 10,000, 50,000, 200,000 ohms/cm or no



  • Inlet/Outlet: ½” NPT
  • Capacity: ½ cubic foot
  • Flow Rate: Up to 3 GPM
  • Maximum Feed Pressure: 50 psi without regulator kit
  • Maximum Temperature: 110°F
  • Bottom Drain and Sample Port: ⅜” ball valve
Model Monitor** Pre-Filter Size In. (W x D x H) Ship Weight Lbs.
Silex Single Deionizers Without Casters
00M10400 None None 11 x 9 x 36 28
00M12500 200K 10” 16 x 9 x 36 33
00M15500 50K 10” 16 x 9 x 36 33
Silex Single Deionizers With Casters
00M10000 None None 13 x 41 x 18.5 30
00M11200 1 meg/alarm 10” 16.5 x 41 x 18.5 35
00M12200 200K 10” 16.5 x 41 x 18.5 35
00M15200 50K 10” 16.5 x 41 x 18.5 35
00M17200 20K 10” 16.5 x 41 x 18.5 35